Dishlex DX103SK Manuel d'utilisateur

User manualDishwasherDX 103

Fault code and malfunction Possible cause and solution• continuous flash of the start/cancelindicator light• 1 flash of the 'Finished' indic

The cleaning results are not satisfactoryThere are streaks, milky spots ora bluish coating on glasses anddishes• Decrease the rinse aid dosage.Dry wat

1234Adjusting the level of the applianceMake sure that the appliance is level to close and sealthe door correctly. If the level of the appliance is co

The appliance has a security feature to prevent dirtywater going back into the appliance. If, the spigot of thesink has a 'non-return valve'

– 'you' means the purchaser of the Appliance nothaving purchased the appliance for re-sale,and 'your' has a corresponding meaning.

– in the case of services, at its option, to the sup-ply of the services again or the payment of thecost of having the services re-supplied;and in the

www.electrolux.comwww.dishlex.com.au156998835-05-072009

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Washing programmes _ _ _ _ _ _

• A qualified and competent person must do theplumbing installation.• Do not change the specifications or modify this prod-uct. Risk of injury and dam

Washing programmesProgram Degree of soil Type of load Program descriptionPots Heavy soil Crockery, cutlery,pots and pansPrewashMain wash up to 70°C2 i

3. Set the correct washing program for the type ofload and soil.4. Fill the detergent dispenser with the correct quan-tity of detergent.5. Start the w

• While you load cutlery and dishes, do these steps:– Load hollow items (e.g. cups, glasses and pans)with the opening down.– Make sure that water does

4. Replace the front runner stops (A) in their initialposition.Caution! If the basket is in the upper position,do not put cups on the cup racks.Use o

Select and start a washing programDo these steps to set and start a washing program:1. Close the door.2. Turn the program knob to set the washing prog

3To remove filters B andC, turn the handle ap-proximately 1/4 anti-clockwise.4Remove the flat filter Afrom the bottom of the ap-pliance.5Put the filte